| Home |
| Work |
| Who am I |
| Links |
COUNTY 1164
Specs Page, Thanks Phillip
MAX POWER AT ENGINE CRANKSHAFT (kW): 84: (112 hp) at 2300 engine rpm
MAX. POWER AT PTO SHAFT (kW): 76.1; (102 hp) at 2300 engine rpm.
ENGINE: Ford in
line direct injection diesel, Cylinders = 6, Bore = 112 mm, Stroke =
112 mm, Displacement = 6,560 cc, Compression ratio = 16.5:1, Operating speed range
= 2,300 rpm.
TRANSMISSION: Type, Dual range constant mesh heavy duty 8 fwd. 2 rev.
STANDARD
SPEEDS: Forward = 3.1, 5.6, 6.7, 9.2, 11.0.19.9, 24.0, 32.6 km/h, Reverse
= 4.4, 15.8 km/h, on 18.4 x 30 x 8 rear tyres.
STANDARD TYRES: Front = 18.4 x 30 x 8, Rear = 18.4 x 30 x 8.
TURNING RADIUS: 2.8 m with brakes, Ground clearance = 392 mm.
OVERALL DIMENSIONS: Length = 4,080 mm, Width = 2,020 mm, Height to top of steering
wheel = 1,780 mm, Tread, Front = 1,630 to 2,130 mm, Rear = 1,630 to 2,130 mm, Wheelbase
= 1,820 mm.
BELT PULLEY: Diameter = 266 mm, Width = 165 mm, Speeds = 3160 rpm at 2100 engine
rpm or 16.05 metres/sec.
PTO: Standard speed = 1,000, Engine rpm at standard pto speed = 2,060, Spline
shaft diameter = 34.90 mm, Height above ground on standard tyres = 514 mm, End of shaft
is 355 mm ahead of drawbar pin, Shaft central between wheels, Rotation clockwise
viewed from rear.
HYDRAULICS: Reservoir capacity 53 L, Pump capacity = 583 ml/s, Max pressure = 17.23
MPa, Number remote outlets = two.
IMPLEMENT ATTACHMENT: 3 pt, Category 2 linkage.
ADDITIONAL EQUIPMENT AVAILABLE: Belt pulley, Weights, Remotes.
|
