| Home |
| Work |
| Who am I |
| Links |
COUNTY 6600 FOUR
Specs Page, Thanks Phillip
MAX POWER AT ENGINE CRANKSHAFT (kW): 57.7 (77.3 hp) at 2,100 engine rpm.
MAX POWER AT PTO SHAFT (kW): 52.2 (71 hp) at 2,100 engine rpm.
MAX CRANKSHAFT TORQUE: 283.4 Nm at 1,480 engine rpm.
ENGINE: Ford direct Injection, Cylinders = 4, Bore = 112 mm, Stroke = 107 mm,
displacement = 4,195 cc, Compression ratio = 16.3:1, Operating speed range = 2,100 rpm.
STANDARD SPEEDS: Forward = 2.5, 3.3, 5.5, 7.8, 9.2, 11.5, 20.0, 26.9 km/h, Reverse
= 3.6, 13.1 km/h, on 18.4 x 30 x 6 rear tyres.
STANDARD TYRES: Front = 11.2 x 24 x 4, Rear = 18.4 x 30x 6.
TURNING RADIUS: 6.25 (4WD) m, Ground clearance = 391 mm.
OVERALL DIMENSIONS: Length = 3,952 mm, Width = 2,080 mm, Height to top of steering
wheel = 1,640 mm, Tread, Front = 1,470 to 1,680 mm, Rear = 1,420 to 1,900 mm, Wheelbase
= 2,298 mm.
BELT PULLEY: Diameter = 280.0 mm, Width = 165.1 mm, Speeds = 3,000 to 3,200 fpm at
2,100
engine rpm or 15.3 to 16.3 metres/sec.
PTO: Standard speed = 540, Engine rpm at standard pto speed = 1,900, Spline Shaft
diameter = 34.9 mm, Height above ground on standard tyres = 635 mm, Shaft central
between wheels, Rotation clockwise viewed from rear.
HYDRAULICS: Reservoir capacity = 56.8 L, Pump capacity = 568 ml/s, max pressure
= 17.23 MPa, Number remote outlets, P.S STD.
IMPLEMENT ATTACHMENT: 3 pt, Category II linkage, Max lift at hitch point = 1,947
kg.
ROPS CAB OR ROLLBAR: 4 post Rollbar tested AS163611974.
ADDITIONAL EQUIPMENT AVAILABLE: Belt pulley, Weights, Dual power transmission, Load monitor, 2 speed PTO.
|
