Puddingsworld.
 

Contact Pudding

FIAT 1000

MAX POWER AT ENGINE CRANKSHAFT (kW): 74.57, or 100 hp at 2,400 engine rpm.
MAX POWER AT PTO SHAFT (kW): 68.38, or 92 hp (672 rpm) at 2,410 engine rpm.
MAX POWER AT DRAWBAR (kW): 62.34, or 84 hp at 2,385 engine rpm.
MAX CRANKSHAFT TORQUE: 322 Nm at 1,600 engine rpm.
MAX DRAWBAR PULL: 46 kN at 1.26 km/h, on 15 x 34 tyres when tractor weighted to 5,060 kg.
ENGINE: Fiat model 8065, 4-stroke, Direct injection diesel, Cylinders = 6, Bore = 100 mm, Stroke = 110 mm, Displacement = 5,184 cc, Compression ratio = 17:1, Operating speed range = 650 to 2,400 rpm.
TRANSMISSION: Type = 4 speed constant mesh synchronized with 4 speed reduction.
STANDARD SPEEDS: Forward = 1.2, 2.0, 2.8, 4.1, 3.3, 4.9,6.7, 8.3, 9.9, 12.7, 17.0, 24.9 km/h, Reverse = 3.3, 5.1,7.0, 10.1 km/h, on 23.1 x 30 rear tyres.
STANDARD TYRES: Front = 8.25 x 20 x 6 ply, Rear = 23.1 x 30 x 8 ply.
TURNING RADIUS: 4 m (with brakes), Ground clearance = 584 mm.
OVERALL DIMENSIONS: Length = 3810 mm, Width = 1930 mm, Height (to top of radiator) =  625 mm, Tread, Front = 1,397 to 2,006 mm, Rear = 1,498 to 2,108 mm, Wheelbase = 2,497 mm.
WEIGHT (as sold, without ballast): 5,060 kg, as tested = 5,216 kg.
BELT PULLEY: Diameter = 360 mm, Width = 210 mm, Speeds = 1,341 rpm at
2,400 engine rpm, 25.3 metres/second.
PTO: Standard speed = 540/1,000 rpm, Engine rpm at standard pto speed = 1,940/2,038, Pto power at standard pto speed (kW) = 61.15/62.64, Spline shaft diameter =  34.9 mm, Shaft central between wheels, Rotation clockwise viewed from rear.
HYDRAULICS: Reservoir capacity-trans oil, pump capacity = 47 I/min, Maximum pressure = 17.65 MPa, Number remote outlets = 2.
IMPLEMENT ATTACHMENT: 3 point linkage, Category = 2 linkage, Max lift at hitch point = 3,200 kg, Front, Mid, Rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Alternative wheel and tyre equipment and weights.

FIAT 1000DT

STANDARD SPEEDS: Forward = 1.4, 2.2, 2.9, 3.4, 4.3, 5.1, 6.8, 8.4, 10.0, 12.8, 17.1, 25.0 km/h, Reverse = 3.5, 5.3, 7.1, 10.3 km/h, on 16.9 x 38 rear tyres.
STANDARD TYRES: Front = 11.2 x 28 x 6 ply, Rear = 23.1 x 30 x 8 ply.
TURNING RADIUS: 4.5 m (with brakes), Ground clearance = 420 mm.
OVERALL DIMENSIONS: Length = 3,940 mm, Height (to top of radiator) = 1,660 mm, Tread, Front = 1,700 to 1,800 mm, Rear = 1,500 to 2,100 mm, Wheelbase = 2,515 mm.
NOTE: Other specifications same as 1000 model.

 

	Thanks Fabio for the images