|
| |
FIAT 1380
MAX. POWER AT PTO SHAFT (kW): 92.1 (123.5 hp) 1000 r/min. at 2,320 engine r/min.
MAX. DRAWBAR POWER (kW): 78.2 (104.9 hp) at 2,400 engine r/min.
MAX. CRANKSHAFT TORQUE (Nm): 492.6 at 1, 600 r/min.
MAX. DRAWBAR PULL (kN): 58.2 at 3.9 km/h. on 18.4 x 38 duals when tractor
weighted to 7,709 kg.
ENGINE: Fiat 8065 turbo, Cylinders = 6, Bore = 103 mm, Stroke = 110 mm,
Displacement = 5,499 cm3, Compression ratio = 16.5:1.
TRANSMISSION: Type = constant/synchro.
STANDARD SPEEDS: Forward = 2.81, 3.55, 4.29, 5.18, 6.44, 8.12, 9.82, 11.84,
15.5, 19.56, 23.62, 28.5 km/h, Reverse = 6.57, 8.28, 10.02, 12.09 km/h. on 23.1
x34 x 8 rear tyres.
STANDARD TYRES: Front = 11.00 x 16 x 8, Rear = 23.1 x 34 x 8, Ground clearance =
663 mm.
OVERALL DIMENSIONS: Length = 4,134 mm, Width = 2,220 mm, Height to highest point
of cab = 2,842 mm, Tread = Front = 1,600 to 2,100 mm, Rear = 1,520 to 2,220 mm.
WEIGHT (as sold without ballast): 6,740 kg.
PTO: Standard PTO speeds = 540/1,000 r/min, Spline shaft diameter = 35 mm, Shaft
central between wheels, Rotation, clockwise viewed from rear.
HYDRAULICS: Pump capacity 910 ml/sec, Max pressure = 17.00 MPa, Number of remote
outlets = 2.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 2, Max lift at hitch point =
4,400 kg
ROPS CAB OR ROLLBAR: Cab, Official noise rating 78.5 dBA.
STANDARD EQUIPMENT: Supercomfort cab, power steering, 540/1,000 r/min PTO.
OPTIONS AVAILABLE: Weights and selection tyre equipment.
FIAT 1380 DT MAX DRAWBAR POWER : 78.6 kW (105.4 hp) at 2,400
engine r/min.
MAX DRAWBAR PULL (kN): 69.5 at 3.2 km/h. on 18.4 x 38 duals when tractor
weighted to 7,709 kg.
STANDARD TYRES: Front: 14.9 x 28 x 6, Rear = 23.1 x 34 x 8.
GROUND CLEARANCE: 470 mm.
OVERALL DIMENSIONS: Length = 4,182 mm, Width = 2,220 mm, Height to highest point
of cab = 2,842 mm, Tread = Front = 1,800 to 2,234 mm, Rear = 1,520 to 2,220 mm.
WEIGHT (as sold without ballast): 7,290 kg.
NOTE: Other specifications as for 1380.
|