Puddingsworld.
 

Contact Pudding

FIAT 211Rb FACTOTUM PETROL

MAX HP AT ENGINE CRANKSHAFT: 20.5 at 2,300 engine rpm.
MAX HP AT PTO SHAFT: 19.5 (585 rpm) at 2,300 engine rpm.
MAX HP AT DRAWBAR: 18.9 at 2,301 engine rpm.
MAX CRANKSHAFT TORQUE: 54 lb-ft at 1,350 engine rpm.
MAX DRAWBAR PULL: 2,530 lb at 1.87 mph, on 9.5 x 24 tires.
ENGINE: 4-stroke petrol, Cylinders = 4, Bore-2.830 in. Stroke = 2.950 in. Displacement =74.5 cu. in. compression ratio = 7.2: 1, Operating speed =2,300 rpm.
TRANSMISSION: Type = Sliding spur gears with reduction box, final drive by spur gear and differential lock.
STANDARD SPEEDS: Forward = 1.3, 2.2, 3.5, 4.9, 8.3, 13.5 mph, Reverse =1.9, 7.4 mph, on 9.5 x 24 rear tires.
STANDARD TIRES: Front = 5.00 x 15 x 4-ply, Rear = 9.5 x 24 x 4-ply.
TURNING RADIUS: 9 ft.1/2 in. Ground clearance = 19-3/4 in.
OVERALL DIMENSIONS: Length = 102-3/8 in. Height (to top of radiator)  = 51-1/4 in. Tread, Front = 41-1/4 in. to 65 in. Rear = 39-1/2 in. to 67 in. Wheelbase = 67 in.
WEIGHT (as sold, without ballast): 2,000 lb.
BELT PULLEY: Diameter = 8-1/4 in. Width = 4-3/4 in. Speed = 1,464 rpm.
PTO: Spline shaft diameter 1-3/8 in. Height above ground, Standard tires = 25-1/2 in. End of shaft 9 in. ahead of drawbar pin, Shaft central between wheels, Rotation =  Clockwise, Viewed from rear.
HYDRAULICS: Max. pressure = 1,565 psi, Pump capacity = 1.76 gpm.
IMPLEMENT ATTACHMENT: Category 1 linkage, Maximum  lift at hitch point = 1,200 lb, Mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Belt pulley, Wheel weights (front and rear), rear flood light, Registration kit, Mid-mounted implement linkage, 10 x 24 x 4-ply rear tires and remote hydraulic control valve.

1963 211Rb PETROL

FIAT HIGH CLEARANCE 211 Rb

STANDARD SPEEDS: Forward = 1.9, 3.3, 5.2, 7.3, 12.4, 20.2 mph, Reverse = 2.8, 11.1 mph.
STANDARD TIRES: Front = 5.00 x 15 x 4-ply, Rear = 9.5 x 36 x 4-ply.

GROUND CLEARANCE: 26 in.
OVERALL DIMENSIONS: Length = 108 in. Height (to top of radiator) = 57-3/4 in. Tread, Front = 41-1/4 to 65 in. Rear = 39-1/2 to 67 in. Wheelbase = 67 in.
WEIGHT (as sold, without ballast): 2,450 lb.
ADDITIONAL EQUIPMENT AVAILABLE: Belt pulley, Wheel weights (front only), Rear flood light, Registration kit, Mid mounted implement linkage, Remote hydraulic control valve.
NOTE: Other specifications same as standard model.