| Home |
| Work |
| Who am I |
| Links |
FIAT 411C
MAX. HP AT PTO SHAFT/PULLEY: 37.33 at 2,300 engine rpm.
MAX. HP AT DRAWBAR: 29.38 at 2,304 engine rpm.
MAX. CRANKSHAFT TORQUE: 103.4 lb/ft at 1,600 engine rpm.
MAX. DRAWBAR PULL: 5,147 lb at 1.74 mph, on 10-1/4 in. tracks.
ENGINE: 4-stroke diesel, Cylinders = 4, Bore = 3.35 in. Stroke = 3.94 in. Displacement
= 138.5 cu. in. Compression ratio = 21.5:1 = Rated speed = 2,300 to
2,530 rpm.
TRANSMISSION: Type = Gear.
STANDARD SPEEDS: Forward = l.0, 1.8, 2.3, 3.4, 4.5, 6.2 mph, Reverse = 1.9, 3.4 mph.
STANDARD TRACKS: Tread (centre to centre) = 43-1/2 in. Width = 10-1/4 in. Length on
ground = 51-3/4 in.
GROUND CLEARANCE: 10-1/2 in.
OVERALL DIMENSIONS: Length = 99-1/2 in. Width = 56-1/2 in.
WEIGHT: 5,130 lb unballasted, as sold.
BELT PULLEY: Diameter = 9-3/4 in. Width = 5-3/4 in. speed = 1,196 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Height above ground on standard tracks =
17-1/2 in. Shaft central between tracks, Rotation = clockwise, viewed from rear.
HYDRAULICS: Max. pressure = 2,130 psi; pump capacity = 3.7 gpm.
IMPLEMENT ATTACHMENT: Category 1 linkage, max lift at hitch point = 2,650 lb.
 |
 |
 |