| Home |
| Work |
| Who am I |
| Links |
FIAT 411Rb PETROL
MAX HP AT ENGINE CRANKSHAFT: 39 at 2,500 engine rpm.
MAX HP AT BELT: 35 at 2,500 engine rpm.
MAX CRANKSHAFT TORQUE: 85 lb/ft at 1,600 engine rpm.
MAX DRAWBAR PULL: 3,300 lb, on 11 x 28 tyres.
ENGINE: Vertical in-line, 4 stroke petrol, Water-cooled, Over-head valves, Cylinders
= 4, Bore = 3.230 in. Stroke = 3.540in. Displacement = 116 cu. in. Compression
ratio = 7.5:1. Rated speed = 2,500 rpm.
TRANSMISSION: Type = Sliding gears with epicyclic reduction.
STANDARD SPEEDS: Forward = 1.4, 2.6, 4.2, 5.3, 9.6, 15 mph, Reverse = 2.1, 7.8 mph, on 11 x 28 rear tyres.
STANDARD TYRES: Front = 600 x 16, Rear = 11 x 28.
GROUND CLEARANCE: 16 in.
OVERALL DIMENSIONS: Length = 108 in. Width = 65 to 96 in. Height (to top of
radiator) = 54 in. Tread, Front = 51 to 59 in. Rear = 63 to 67 in.
WEIGHT: 3,162 lb with fuel, oil, water and 485 lb ballast.
BELT PULLEY: Diameter = 9-7/8 in. Width = 5-7/8 in. Speeds = 1,300 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Height above ground on standard tyres =
22-3/4 in. End of shaft = 6-1/2 in. ahead of drawbar pin, Shaft central between
wheels, Rotation = clockwise, Viewed from rear.
ELECTRICS: 24 volts, 196 watt generator.
HYDRAULICS: Maximum pressure = 2,130 psi, Pump capacity = 3.7 gpm.
IMPLEMENT ATTACHMENT: Category 1 linkage, Maximum lift at hitch point = 2,650 lb,
Centre, Side, Mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Lifter control, 12 x 28 and 13 x 24 wheels and tyres.
 |