| Home |
| Work |
| Who am I |
| Links |
FIAT 415
MAX HP AT ENGINE CRANKSHAFT: 45 at 2,500 engine rpm.
MAX HP AT PTO SHAFT: 42 at 2,500 engine rpm.
MAX CRANKSHAFT TORQUE: 103 lb-ft at 1,600 engine rpm.
ENGINE: 4-stroke, Indirect injection diesel, Cylinders = 4, Bore = 3.350 in.
Stroke = 3.940 in. Displacement = 138.5 cu. in. Compression ratio = 21.5:1,
Rated speed = 2,500 rpm.
TRANSMISSION: Type = Sliding spur gears with epicyclic reduction gear,
synchromesh on 2nd, 3rd, 5th and 6th gears with spur gear final drive and
differential lock.
STANDARD SPEEDS: Forward =1.5, 2.7, 4.2, 5.3, 9.6, 15.2 mph, Reverse = 2.2, 7.8
mph, on 12.4 x 28 rear tires.
STANDARD TIRES: Front = 6.00 x 16 x 4-ply, Rear = 12.4 x 28 x 4-ply.
TURNING RADIUS: 10 ft 5 in. Ground clearance = 18-3/4 in.
OVERALL DIMENSIONS: Length = 118-1/8 in. Height (to top of bonnet) = 51 in.
Tread, Front = 50-3/8 to 74 in. Rear = 47-1/4 to 74-3/4 in. Wheelbase = 75-3/4
in.
WEIGHT (as sold, without ballast}: 3,500 lb.
BELT PULLEY: Diameter = 9-7/8 in. Width = 6 in. Speed = 1,300 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, Rotation,
Clockwise, Viewed from rear.
HYDRAULICS: Max. pressure = 2,100 psi, Pump capacity = 3.9 gpm.
IMPLEMENT ATTACHMENT: Category 1 and 2 linkage, Maximum lift at
hitch point = 2,650 lb, Front, Mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Remote hydraulic control valve (single or double
acting), Supplementary hydraulic oil reservoir, Dual category linkage, Linkage
drawbar, Belt pulley, Wheel weights, Rear flood light, Registration kit, Down swept
exhaust, 13.6 x 28 and 14.9 x 24 rear tires and front ballast.
 |
 |