| Home |
| Work |
| Who am I |
| Links |
FIAT 450
Brochure
MAX HP AT ENGINE CRANKSHAFT: 45 at 2,400 engine rpm.
ENGINE: Fiat 853 diesel, 4-stroke, Direct injection, Water-cooled, Cylinders =
3, Bore = 3.74 in. Stroke = 4.33 in. Displacement = 142.78 cu. in. Compression
ratio = 17:1, Operating speed range = 900 - 2,400 rpm, Direct 12 volt electric
start with thermostart.
TRANSMISSION: Type = 8 forward speeds, 2 reverse, synchromesh on 3rd, 4th, 7th,
and 8th gears.
STANDARD SPEEDS: Forward = 1.4, 2.1, 3.1, 4.0, 5.0, 7.7, 11.3, 14.5 mph, Reverse
= 2.0, 7.3 mph, on 12.4 x 28 rear tires.
STANDARD TIRES: Front = 6.00 x 16 x 4-ply, Rear = 12.4 x 28 x 4-ply.
TURNING RADIUS: 11 ft 6 in. Ground clearance = 181 in.
OVERALL DIMENSIONS: Length = 115 in. Height (to top of radiator) = 53 in. Tread,
Front = 50-3/8 to 77-3/4 in. Rear = 47-1/4 to 74-3/4 in. Wheelbase = 75-5/8 in.
WEIGHT (as sold, without ballast): 3,900 lb.
BELT PULLEY: Diameter = 9.8 in. Width = 5.9 in. Speed = 1,248 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, rotation is
clockwise, viewed from rear.
HYDRAULICS: Max pressure = 2,135 psi, Pump capacity = 4.8 gpm.
IMPLEMENT ATTACHMENT: Category 1, three-point linkage, Max lift at hitch point =
3,086 lb, Front, Mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Alternative wheel and tire equipment and
weights, remote control valve, linkage drawbar, swinging drawbar, belt pulley;
downswept exhaust, power steering, front tow hook, front weights and frame, high
speed pto, three-point linkage = cat. 1 and 2.
|
 |
| Thankyou Kenjar for Supplying this Brochure |  |
 |
 |
 |