| Home |
| Work |
| Who am I |
| Links |
FIAT 505CM AGRICULTURAL CRAWLER
ENGINE: Fiat model 8035, 4 stroke, Direct injection diesel, Cylinders = 3, Bore
= 100 mm, Stroke = 110 mm, Displacement = 2,592 cc, Compression ratio = 17:1, Operating speed
range = 650 to 2,600 rpm.
TRANSMISSION: Type = Sliding gears with single reduction spur gear final drive.
STANDARD SPEEDS: Forward = 1.8, 3.3, 4.5, 6.2, 8.2, 11.2 km/h, reverse = 3.4, 6.1
km/h.
STANDARD TRACKS: Tread (centre to centre) =1,300 mm, Width = 360 mm, Length on
ground = 1,318 mm.
OVERALL DIMENSIONS: Length = 2,675mm, Width = 1,660 mm, Height (to top of
radiator) = 1,230 mm.
WEIGHT (as sold, without ballast): 2,700 kg.
BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speeds = 1,352 rpm at 2,600 engine
rpm,
17.7 metres/second.
PTO: Standard speed = 540, Engine rpm at standard pto speed = 2,160, spline shaft
diameter = 34.9mm, Shaft central between wheels, rotation clockwise, viewed from rear.
HYDRAULICS: Reservoir capacity-trans oil, pump capacity = 19.3 I/min, Maximum
pressure = 14.72 MPa, Number of Remote outlets = 1.
IMPLEMENT ATTACHMENT: 3 point linkage, Category = 1 and 2 linkage, Maximum lift at
hitch point = 1,550 kg, Front, Mid, Rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Angle and tilt dozer blade.
|
