Puddingsworld.
 

Contact Pudding

FIAT 540

Thank you Lockwood for this Brochure

MAX POWER AT ENGINE CRANKSHAFT (kW): 40.27 (54 hp) at 2,600 engine rpm.
MAX POWER AT PTO SHAFT (kW): 36.39 (49 hp) (654 rpm) at 2,616 engine rpm.
MAX POWER AT DRAWBAR (kW): 32.14 (43 hp) at 2,549 engine rpm.
MAX CRANKSHAFT TORQUE: 162 Nm at 1,700 engine rpm.
MAX DRAWBAR PULL: 26 kN, at 2.2 km/h, on 14.9 x 30 tyres when tractor weighted to 3,010 kg.
ENGINE: fiat model 8035, 4-stroke, Direct injection diesel, Cylinders = 3, Bore = 100 mm, Stroke = 110 mm, Displacement = 2,592 cc, Compression ratio = 17:1, Operating speed range = 650 to 2,600 rpm.
TRANSMISSION: Type = Combination constant and synchromesh.
STANDARD SPEEDS: Forward = 2.2, 3.5, 4.3, 6.7, 8.6, 13.0, 19.6, 24.9 km/h, Reverse = 3.3, 12.5 km/h, on 12.4 x 28 rear tyres.
STANDARD TIRES: Front = 6.00 X 16 x 4 ply, Rear = 12.4 x 28 x 4 ply.
TURNING RADIUS: 3.10 m (with brakes), Ground clearance = 465 mm.
OVERALL DIMENSIONS: Length = 2,950 mm, Height (to top of radiator)
1,345 mm, Tread, Front = 1,280 to 1,975 mm, Rear =1,200 to 1,900 mm, wheelbase = 2,950mm.
WEIGHT (as sold, without ballast): 1,814 kg, As tested = 3,010 kg.
BELT PULLEY: Diameter = 250 mm, Width = 150 mm, Speeds =1,352 rpm at 2,600 engine rpm, 17.7 metres/second.
PTO: Standard speed = 540, Engine rpm at standard pto speed = 2,160, Pto power at standard pto speed (kW) = 30.57, Spline shaft diameter = 34.9 mm, Height above ground, Standard tyres = 600 mm, Shaft central between wheels, Rotation clockwise viewed from rear.
HYDRAULICS: Reservoir capacity-trans oil, Pump capacity = 23.6 l/min.
Maximum pressure = 14.72 MPa, Number of Remote outlets = 1
IMPLEMENT ATTACHMENT: 3 point linkage, catergory 1 linkage, maximum lift at hitch point = 1,550kg, Front, Mid, Rear mounting pads.
CABIN OR ROLLBAR: Combination rollbar/canopy.
ADDITIONAL EQUIPMENT AVAILABLE: Alternative wheel and tyre equipment and weights, Remote control valve, Linkage drawbar, Belt pulley, Power steering, Front tow hook, Down swept exhaust, High speed pto, Super comfort seat, Front ballast weight and frame.

FIAT 540DT

STANDARD TYRES: Front = 9.5 x 20 x 4 ply; Rear = 13.6 x 28 x 4 ply.
NOTE: Other specifications same as 540 model.