Puddingsworld.
 

Contact Pudding

FIAT 550/550DT

MAX HP AT ENGINE CRANKSHAFT: 55 at 2,400 engine rpm.
ENGINE: Fiat Type 854 diesel, 4-stroke, Direct injection, Water-cooled, Cylinders = 4, Bore = 3.74 in. Stroke = 4.33 in. Displacement = 190.3 cu. in. Compression ratio = 17:1, Operating speed range = 900 to 2,400 rpm, Direct 12 volt electric start with thermostat.
TRANSMISSION: Type = Synchromesh on 3rd, 4th, 7th and 8th gears, 8 forward and 2 reverse.
STANDARD SPEEDS: Forward = l.4, 2.1, 3.2, 4.1, 5.2, 7.8, 11.4, 14.9 mph, Reverse = 2.0, 7.7 mph, on 16.9 x 28 rear tires.
STANDARD TIRES: Front = 7.50 x 16 x 6-ply (cast wheel 5.50 x 16), Rear = 16.9 x 28 x 6-ply (DW14 x 28 rim with cast centre).
TURNING RADIUS: 11 ft 10 in. Ground clearance = 18-7/8 in.
OVERALL DIMENSIONS: Length = 122-3/4 in. Height (to top of radiator) = 54-3/4 in. Tread, Front = 52 to 79-1/4 in. Rear = 51-1/4 to 78-3/4 in. Wheelbase = 81-1/2 in.
WEIGHT (as sold, without ballast): 5,650 lb.
BELT PULLEY: Diameter = 9.8 in. Width = 5.9 in. Speed = l,248 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, Rotation = clockwise, viewed from rear.
HYDRAULICS: Max Pressure = 2,135 psi, Pump capacity = 4.8 gpm.
IMPLEMENT ATTACHMENT: Category 1 and 2 linkage, Max lift at hitch point = 4,012 lb, front, mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Tires, Front 6.00 x 19 (pressed wheel 3.62 x 19), 6.00 x 16 (pressed wheel 4.00E x 16), rear 14.9 x 28 (pressed wheel W13 x 28), 12.4 x 32 (pressed wheel W11 x 32), 12.4 x 38 (pressed wheel DW11 x 38), remote hydraulic control valve, linkage drawbar, belt pulley, down swept exhaust, power steering, front tow hook, front and rear wheel weights, front weight frame and weights, high speed pto adaptor.

	Thanks Fabio for the images.