| Home |
| Work |
| Who am I |
| Links |
FIAT 650
MAX HP AT ENGINE CRANKSHAFT: 65 at 2,200 engine rpm.
ENGINE: OM type CN3 diesel, 4-stroke, Direct injection, Water-cooled, cylinders
= 3, Bore = 4.33 in. Stroke = 5.11 in. Displacement = 225.7 cu. in. Compression
ratio = 17.4:1, Operating speed range = 900 to 2,200 rpm, Direct 12 volt
electric start with excess fuel device for conditions of extreme cold.
TRANSMISSION: Type = Sliding gears, 7 forward, 2 Reverse.
STANDARD SPEEDS: Forward = 1.5, 2.2, 3.6, 5.0, 6.5, 10.3, 16.0 mph, Reverse =
2.5, 7.5 mph, on 18.4 x 30 rear tires.
STANDARD TIRES: Front = 7.50 x 18 (cast wheels), Rear = 18.4 x 30 cast centres
and DW16 x 30 rims), Ground clearance = 20-1/4 in.
OVERALL DIMENSIONS: Length = 132-1/4 in. Height (to top of radiator) = 60-3/8
in. Tread, Front = 57-1/8 to 76-3/4 in. Rear = 51-3/8 to 82-7/8 in. Wheelbase =
87-3/8 in.
WEIGHT (as sold, without ballast): 7,380 lb.
BELT PULLEY: Diameter = 11.8 in. Width = 6.3 in. Speed = l,014 rpm.
PTO: Spline shaft diameter = 1-3/8 in. Shaft central between wheels, Rotation =
clockwise, viewed from rear.
HYDRAULICS: Max pressure = 2,135 psi, pump capacity = 6.2 gpm.
IMPLEMENT ATTACHMENT: Category 2 linkage, max lift at hitch point = 4,630 lb,
Front, Mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Tires, Front 6.50 x 20 (pressed steel wheels),
rear 13.6 x 36, 14.9 x 30, 13.6 x 38, 16.9 x 30, remote control valve, linkage
drawbar, belt pulley, downswept exhaust, power steering, front tow hook, rear
wheel weights, front weight frame and weights.
