|
| |
FIAT 670F Fiat-Someca 670-670DT Brochure in French
MAX POWER AT ENGINE CRANKSHAFT (kW): 50 (68 DIN hp) at 2,500 engine r/min.
MAX POWER AT PTO SHAFT (kW): 47.9 (65.1 hp) 605 r/min, at 2,500 engine r/min.
MAX CRANKSHAFT TORQUE (Nm): 205.8 at 1,400 engine r/min.
ENGINE: Fiat 8045, Cylinders = 4, Bore = 100 mm, Stroke = 110 mm, Displacement =
3,456 cm3, Compression ratio = 17:1.
TRANSMISSION: Type = Constant mesh.
STANDARD SPEEDS: Forward = 1.19, 1.56. 1.97, 2.47, 3.48, 4.57, 5.76, 7.20, 10.16,
13.32, 16.78, 20.99 km/h, Reverse = 1.15, 3.29, 9:77 km/h on 14.9 x 24 rear tyres.
STANDARD TYRES: Front = 6.00 x 16 x 4, Rear = 14.9 x 24 x 6.
TURNING RADIUS: 4.0 m, Ground clearance = 351 mm.
OVERALL DIMENSIONS: Length = 3,064 mm, Width = 1,864 mm, Height to highest point
of steering wheel = 1,394 mm, Tread = Front = 1,164 to 1,464 mm, Rear =
986 to 1,490 mm
MASS (weight as sold without ballast and frame): 2,140 kg.
PTO: Standard pto speeds: 540 r/min, Engine speed at standard pto speed = 2,315
r/min. Power at standard pto speed = 44.8 kW, Spline shaft diameter = 35 mm, Shaft central between
wheels, Clockwise viewed from rear.
HYDRAULICS: Reservoir capacity = 18 L, Pump capacity = 430 ml/sec, Max pressure
= 18.62 MPa, Number of remote outlets = dual double acting.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 1 and 2, Max lift at hitch point
= 2,520
kg.
STANDARD EQUIPMENT: Horizontal exhaust, Hydrostatic steering, Planetary final
drives, Ground speed pto.
OPTIONS AVAILABLE: Safety frame.
FIAT 670FDT
STANDARD TYRES: Front = 750 x 18 x 6, Rear = 14.9 x 24 x 6.
TURNING RADIUS: 4.3 m.
OVERALL DIMENSIONS: Length = 3,205 mm, Width = 1,964 mm, Height to highest point
of steering wheel = 1,394 mm, Tread = front = 1,110 to 1,264 mm, Rear = 986 to
1,490 mm.
MASS (weight as sold without ballast and frame): 2,350 kg.
NOTE: Other specifications as for 670F.
|