|
| |
FIAT 880-5
MAX POWER AT ENGINE CRANKSHAFT (kW): 64.8 (88 hp) at 2,400 engine r/min.
MAX POWER AT PTO SHAFT (kW): 60.6 (81.3 hp) at 1,038 r/min at 2,500 engine
r/min.
MAX POWER AT DRAWBAR (kW): 52.7 (70.7 hp) at 2,500 engine r/min.
MAX DRAWBAR PULL
(kN): 33.6 at 5 km/h on 18.4R x 34 tyres when tractor weighted to 5,244 kg.
ENGINE: fiat 8055; rated at 2,400 r/min, Cylinders = 5, Bore = 103 mm, Stroke = 110
mm, displacement = 4.5 L, Compression ratio = 17:1, Fuel tank capacity = 116 L.
TRANSMISSION: Type = Synchromesh.
STANDARD SPEEDS: Forward = 1.22, 1.59, 1.99, 2.49, 3.57, 4.65, 5.81, 7.26, 10.39,
13.56, 16.94, 21.9 km/h, Reverse = 0.39, 1.15, 3.36, 9.80 km/h on 13.6 x 38
rear tyres.
BRAKES: Hydraulic type = disc.
STANDARD TYRES: Front = 9.00 x 16 x 6, Rear = 18.4 X 34 x 6.
TURNING RADIUS: With brakes = 3.1 m, Without brakes = 4.1 m, Ground clearance = 533 mm.
OVERALL DIMENSIONS: Length = 3,676 mm, Width = 2,600 mm, Height to highest point
of cab = 2,563 mm, Tread = Front = 1,480 mm to 2,080 mm, Rear = 1,700 mm to 2,200 mm.
MASS (weight as sold without ballast): 4,000 kg.
PTO: Standard speeds = 540/1,000 r/min, Engine speed at standard pto speeds = 2,124/2,410 r/min.
PTO: Power at standard pto speed = 60.3 kW, Spline shaft diameter = 35mm and 44 mm. HYDRAULICS: Reservoir
capacity = 44.4 L, Pump capacity = 31.3 L/min, Max pressure = 18.62 MPa, Number of remote
outlets = 3, Open centre.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 2, Max lift at hitch point = 2,500 kg,
Drawbar type = roller.
APPROVED CAB OR ROPS ROLLBAR: Rops, Official noise rating = 87.5 dBA with
cab.
STANDARD EQUIPMENT: Hydrostatic steering, Fully suspended platform, Deluxe seat,
Roller drawbar, Front weights, Heavy cast rear wheel centres.
OPTIONS AVAILABLE: supercomfort cab, selection of wheel and tyre equipment
FIAT 880.5DT
MAX POWER AT DRAWBAR (kW): 52.6 (70.6 hp) at 2,500 engine r/min.
MAX DRAWBAR PULL (kN): 47.1 at 2.7 km/h., On 18.4R x 34 tyres when tractor
weighted to 5,244 kg.
STANDARD TYRES: Front = 12.4 x 28 x 6, Rear = 18.4 x 34 x 6.
TURNING RADIUS : With brakes = 5 m, Without brakes = 5.7 m.
OVERALL DIMENSIONS: Length = 3,810 mm, Width = 2,400 mm, Height to highest point of
cab = 2,583 mm, Tread = Front = 1,712 mm to 2,012 mm, Rear = 1,700 mm to 2,200
mm.
MASS (weight as sold without ballast): 5,200 kg, As tested: 5,244 kg.
NOTE: Other specifications as for 880.5.
|