| Home |
| Work |
| Who am I |
| Links |
FIAT 900
MAX. HP AT ENGINE CRANKSHAFT: 90 at 2,400 engine rpm.
MAX. HP AT PTO SHAFT: 86.1 at 1,400 engine rpm.
ENGINE: Fiat Type 856 diesel, 4-stroke, direct injection, water-cooled,
cylinders = 6, Bore = 3.74in. Stroke = 4.33in. Displacement = 285.4cu. in.
Compression ratio = 17:1, Operating speed range = 900 to 2,400 rpm, Direct
electric 12 volt start with thermostart.
TRANSMISSION: Type = Constant mesh gearbox with 3 reductions giving 12 forward
and 4 reverse speeds.
STANDARD SPEEDS: Forward = Low = 0.9, 1.3, 1.7, 2.5, Medium = 2.0, 3.0, 4.1,
6.0, High = 5.0, 7.6, 10.2, 14.9 mph, Reverse = 2.0, 3.1, 4.2, 6.2 mph, on 18.4
x 34 rear tires.
STANDARD TIRES: Front = 8.25 x 20 (cast wheels), Rear = 23.1 x 30 (heavy cast
centres).
TURNING RADIUS: 16 ft; Ground clearance = 23 in.
OVERALL DIMENSIONS: length = 164in. Height (to top of radiator) = 62 in. Tread,
Front = 55 to 79 in. Rear = 59 to 83 in. Wheelbase = 97.6 in.
WEIGHT (as sold, without ballast): 10,300lb (with ballast over 12,000lb).
BELT PULLEY: Diameter = 14in. Speed = 1,341rpm.
PTO: Spline shaft diameter = 1-3/8in. 6 spline for 540 rpm, 1-3/8in. 27 spline
for 1,000rpm, Shaft central between wheels, Rotation, Clockwise, Viewed from
rear.
HYDRAULICS: Max pressure = 2,135psi, pump capacity = 9gpm.
IMPLEMENT ATTACHMENT: Category 2 linkage, Max lift at hitch point = 4,850lb,
front, mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: Tires, front 7.50 x 20, rear 18.4 x 34, remote
control valve, break away couplings 1/2in. belt pulley, front and rear wheel
weights, front weight frame and weights, rear work lamp, down swept exhaust,
hydraulic lift, 3-point linkage.
