Puddingsworld.
 

Contact Pudding

MASSEY FERGUSON 130 DIESEL

Brochure

MAX HP AT ENGINE CRANKSHAFT: 28.5 at 2,250 engine rpm.
MAX HP AT PTO SHAFT: 26.5 (643 rpm) at 2,250 engine rpm.
MAX HP AT DRAWBAR: 22.5 at 2,250 engine rpm.
MAX CRANKSHAFT TORQUE: 76.6 lb-ft at 1,106 engine rpm.
ENGINE: Vertical, in-line, Water-cooled, 4-stroke diesel, Cylinders = 4, Bore = 3.125 in. Stroke = 3.500 in. Displacement =107 cu. in. Compression ratio = 22.5:1, Operating speed range = 600 to 2,250
TRANSMISSION: Type = Constant mesh, with epicyclic reduction.
STANDARD SPEEDS: Forward = 1.25, 1.66, 2.56, 3.65, 5.26, 6.96, 10.79, 15.50 mph, Reverse = 1.41, 5.01 mph, on 11.2/10 x 28 rear tyres.
STANDARD TYRES: Front = 5.50 x 16, Rear = l1.2/10 X 28.
TURNING RADIUS: 9 ft (with brakes), Ground clearance = 13.3 in.
OVERALL DIMENSIONS: Length = l09 in. Width = 63 in. Height (to top of steering wheel) = 55 in. Tread, Front = 48 to 72 in. Rear = 48 to 76 in. Wheelbase = 72 in.
WEIGHT (as sold, without ballast): 3,050 lb.
BELT PULLEY: Diameter = 9 in. Width = 6-1/2 in. Speeds = 1,170 rpm at 2,250 engine rpm.
PTO: Spline shaft diameter = 1-3/8 in. Height above ground on standard tyres = 19 in. End of shaft = 14 in. Ahead of drawbar pin, Shaft central between wheels, Rotation clockwise, viewed from rear.
HYDRAULICS: Maximum pressure = 2,000 psi, Pump capacity = 2.8 gpm.
IMPLEMENT ATTACHMENT: Category 1 linkage, maximum lift at hitch point = l,826 lb, Front, Mid and rear mounting pads.
ADDITIONAL EQUIPMENT AVAILABLE: 11 x 28 tyres, Swinging drawbar, Belt pulley, Stabilizers, Front end weights and. trailer hitch.

Thankyou Kenjar for supplying this brochure