| Home |
| Work |
| Who am I |
| Links |
MUIR-HILL 101
MAX HP AT ENGINE CRANKSHAFT: (B.S. Overload) 108.5 at 2,500 engine rpm.
MAX HP AT PTO SHAFT: Upper, 96 (2,500 engine rpm), Lower 91 (770 rpm) at 2,500
engine rpm.
MAX HP AT DRAWBAR: 85 at 2,500 engine rpm.
MAX CRANKSHAFT TORQUE: 253.5lb-ft at 1,500 engine rpm.
MAX DRAWBAR PULL: 14,000lb at 3-1/2mph, on 18.4 x 30 tires when tractor weighted
to 15,000lb.
ENGINE: Ford 2704E, vertical, in-line, 4.stroke diesel, water-cooled, cylinders
= 6, Bore = 4.1255in. Stroke = 4.524 in. Displacement = 363cu. in. Compression
ratio = 16.5: 1, Operating speed range = 1,250-2,500 rpm.
TRANSMISSION: Type = Constant mesh, sliding coupling engagement.
STANDARD SPEEDS: Forward = 1.72, 2.15, 3.78, 5.15, 6.17, 7.79, 13.56, 18.39 mph,
Reverse = 2.69, 8.91 mph, on 18.4 X 30 rear tires.
STANDARD TIRES: Front = 18.4 x 30, Rear = 18.4 x 30.
TURNING RADIUS: 16 ft 6-1/2in. Ground clearance = 16in.
OVERALL DIMENSIONS: Length = 155 in. Width = 86.4 to 98.4in. Height (to top of
radiator) = 80in. Tread, Front = 64 to 80in. Rear = 64 to 80 in. Wheelbase =
75in.
WEIGHT (as sold, without ballast): 9,637lb.
PTO: Spline shaft diameter = Upper 7/8in. Lower 1-3/8in. Height above ground,
standard tires = Upper 44in. Lower 25in. End of shaft = Upper 48in. Lower
8-1/2in. Ahead of drawbar pin; shaft central between wheels; rotation (upper),
anti-clockwise (lower), clockwise, viewed from rear.
HYDRAULICS: Max pressure = 2,650 psi, pump capacity = 5.6 gpm.
IMPLEMENT ATTACHMENT: 3-point linkage or drawbar; category 1 or 2 linkage, max
lift at hitch point = 3,800lb, Rear, Bottom and Front mounting pads.
STANDARD EQUIPMENT: 3-point linkage, 43-gallon fuel tanks, double roller
drawbar, 4-wheel drive disconnect, Orbitrol power steering, 2 sets double acting
remote controls.
Manufactured by Muir-Hill, division of Winget Ltd., Gloucester, England.