|
| |
SAME MINITAURO
MAX HP AT ENGINE CRANKSHAFT: 46 at 2,200 engine rpm.
ENGINE: Vertical, in-line, 4-stroke, air-cooled, direct injection diesel,
cylinders = 3, Bore = 3.740 in.; stroke = 7.724 in.; displacement = 156 cu. in.,
compression ratio = 16.5:1, operating speed range = 1,000 to 2,200 rpm.
TRANSMISSION: Type = 8 forward, 4 reverse, 2 stage dry-plate clutch and diff.
lock; 4WD.
STANDARD SPEEDS: Forward = I.12, 1.95, 2.82, 4.92, 6.01, 10.10, 15.20 mph;
reverse = 1.88, 3.28, 6.74, 10.13 mph, on 13.6/12 x 28 rear tires.
STANDARD TIRES: Front = 9.51/9 x 20 x 4-ply, Rear-13.6/12 x 28 x 6-ply.
OVERALL DIMENSIONS: Length = 120 in., width = 64 in., height (to top of steering
wheel) = 50 in., tread, front-min. 51 in., rear- min. 51 in., wheelbase-77 in.
WEIGHT (as sold, without ballast): 4,260 lb.
BELT PULLEY: Diameter. = 9 in., width = 4.72 in., speeds = 1,300 rpm at 2,200
engine rpm.
PTO: Spline shaft diameter = 1/3/8 in.
HYDRAULICS: Max. Pressure-2,500 psi; pump capacity-3 gpm.
IMPLEMENT ATTACHMENT: Drawbar front and rear, category 2 linkage. Maximum lift
at hitch point = 1.3 tons, side and front mounting pads, draft and position
control standard.
ADDITIONAL EQUIPMENT AVAILABLE: Power steering (hand control), live pto, ground
speed pto, diff. lock, 14 speed transmission, alternate wheel and tire
equipment, weights, swinging drawbar.
SAFETY FEATURES: Fully protected and sealed braking system, large fenders, low
centre of gravity, heavy duty air cleaner, front and rear towing, down swept
exhaust, linkage drawbar and stays, remote hydraulics (single or double), belt
pulley.
|