Puddingsworld.
 

Contact Pudding

SHIBAURA SD 4340

MAX POWER AT ENGINE CRANKSHAFT (net) (kW): 32 (43 hp) at 2,550 engine r/min.

MAX POWER AT PTO SHAFT (net) (kW): 20.8 (36 hp) at 2,500 engine r/min.

MAX POWER AT DRAWBAR (kW): 22 (29 hp) at 2,500 engine r/min.

MAX CRANKSHAFT TORQUE (Nm): 121 at 2,000 engine r/min.

ENGINE: IHI Shibaura Model LEP 854A, Rated at 2,500 r/min, Cylinders = 4, Bore = 85 mm, Stroke = 94 mm, Displacement = 2.1 l. Compression ratio = 21 :1, Operating speed range = 2,550 r/min, Fuel tank capacity = 35 l.

TRANSMISSION: Type = sliding gear.

STANDARD SPEEDS: Forward = (24) 0.59, 0.76, 0.94, 1.35, 1.74, 2.13, 2.34, 2.70, 2.92, 3.31, 3.36, 3.77, 4.34, 4.62, 5.32, 6.25, 7.30, 8.06, 9.42, 9.88, 11.55, 20.16, 24.72 km/h, Reverse = 0.70, 1.58, 1.74, 3.43, 3.96, 7.32, 8.58, 17.62 km/h on 12.4 x 28 rear tires.

BRAKES: Mechanical, Drum type.

STANDARD TIRES: Front = 8.00 x 18, Rear = 12.4 x 28.

TURNING RADIUS: With brakes = 2.7 m, Without brakes = 3.74 m.

GROUND CLEARANCE = 385 mm.

OVERALL DIMENSIONS: Length = 3,370 mm, Width = 1,520 mm, Height to highest point of steering wheel = 1,510 mm, Tread, Front = (max/min) 1,190 mm fixed, Rear = 1,500 mm/1,200 mm.

MASS (Weight as sold without ballast): 1,630 kg.

PTO: Standard speeds = 546/ 701/ 1,042/ 1,320 r/min, Engine speed at standard pto speeds = 2,500 r/min, Spline shaft diameter = 35 mm.

HYDRAULICS: Reservoir capacity = 35 L, Pump capacity = 27 l/min, Max pressure = 14.9 MPa (2,133 psi), Number of remote outlets = 1, Open centre.

IMPLEMENT ATTACHMENT: Three-point linkage, Category = 1, Max lift at hitch point = 2,000 kg.

STANDARD EQUIPMENT: Vertical muffler, Two stage clutch, Integral power steering, Hydraulic draft and position control, Headlights, Taillights, Direction indicators, Adjustable drawbar, Creeper gears, Rollover frame.

OPTIONS AVAILABLE: Front end weights, Rear wheel weights, Canopy, Double acting remote valve, Quick release couplings, Cat. 1/2 three-point linkage, 14.9 x 24 rear tires.